Description
Suitable for perpendicular (90º) mounting of two pipes / tubes 30 to 114 mm in diameter. Mounting pipe works is a relatively straight forward exercise, pick where you need a 90º boom, clamp it on, tighten up the all thread and walk away.
Stainless Steel clamps are heavy duty, provide a long service life, and suitable for extreme environments. Each clamp is made from 30x30x30 pressed 3 mm 304 Stainless Steel. The threaded bar and nuts are by standard galvanised steel to avoid binding, but can be supplied stainless steel on request.
Using the wrong clamp or not using a bracing kit can lead to failure of the pipe work and costly network downtime. Using the wrong clamp can lead to a range of issues, the most simple of which is equipment misalignment due to a slipping clamp. In extreme cases, the material can break due to increased stresses induced by the constant vibration on a localised point from an inappropriate clamp. Selecting the correct bracket will ensure your equipment maintains its position for many years to come.
Physical Specification
Available Interfaces
| Quantity | Mounting |
|---|---|
|
1
|
Pole Clamp 30 to 114 mm ⌀
|
Subcomponents
| Quantity | Name | Materials | Material Finish |
|---|---|---|---|
|
1
|
90° Welded Jaws, 30x30x30 mm 3 mm Flat Bar
|
||
|
2
|
Jaw Clamps
|
||
|
4
|
M12 Threaded Bar
|
||
|
8
|
M12 Nuts & Washers
|
Downloadable Resources
APAC Infrastructure is an Australian metal fabrication company dedicated to high tech industries in the commercial, industrial, and defence sectors. Our team is committed to evolving our solutions to meet the rapidly changing needs of our rapidly changing world, ensuring your team deliver solutions at the very forefront of technological development. APAC develops made-to-measure height systems for ...