HBR SMA Male Right Angle Crimp Connector for LMR-240 Cable
$9.00
SA1-C-L24.RA
SA1-C-L24.RA
Locally Stocked

SMA connectors have become the mainstay of low frequency wireless technologies.

This Right Angle SMA Male connector is designed for a standard crimp and solder attachment to LMR-240 series coaxial cables. This model has been designed for extended operation to 6 GHz.

Installation is very simple. After preparing the cable, the pin is soldered onto the centre conductor and outer body pushed over the top until the pin sits flush. A standard 6.48 mm (.255") hex die is used to crimp the ferrule.

Recommended Use

Right angle connectors are popular for applications where installation space is in short supply. This connector type is commonly used inside communications boxes and cabinets, and for passive components mounted on backing boards.

Cable Suitability

L-240, sometimes referred to as LMR-240, is a low loss coaxial cable with a medium sized 6.10 mm outer diameter. This series is without a doubt the most popular choice of RF cable, due to its efficient compromise between performance and cost. 

L-240 cable provides the flexibility and easy installation of a smaller diameter cable, with the low attenuation and shielding advantages of a larger cable. Unlike larger cables, L-240 can pass 5G and mmWave frequencies up to 31 GHz.

Pound-for-pound L-240 has the lowest loss of any Flexible cable with performance comparable to Semi-Rigid hard-line cables.

settings_input_hdmi

Interface Specification

Series
Gender
Male
Body Shape
Right Angle
Mounting
Free Hanging
contactless

RF Performance

Operating Freq. Range 0 to 6 GHz
VSWR < 1.50:1
Working Voltage 260 Vrms
Input Impedance
50 Ω
Insertion Loss
0.10 dB
Insulation Resistance
> 5000 Ω
developer_board

Physical Specification

Body Material(s)
Body Plating
Gold
Dimensions
16.7 x 13.6 x 8.0 mm (L x W x D)
Weight
7.4 g
Contact Material(s)
Contact Plating
Gold
Operating Temperature -55 to 155 °C
Mating Cycles
> 500
CAD Drawing
SA1-C-L24.RA CAD Drawing

Documentation & Resources

About the Supplier

HB Radiofrequency engineer high performance 3G, 4G, and 5G components such as antennas, cable assemblies, and RF connectors. Equipment is sourced through the company's extensive global vendor network, providing best-in-class performance. HB Radiofrequency forms an essential unit within the Halberd Bastion enterprise, a wholly Australian-owned company with diversified business units across telecommunications procurement, manufacturing, and projects.