GC32 Heavy Duty Roof Mast, 32 mm Pole
Locally Stocked

32 mm roof masts are an ideal mid-grade mast, providing good stability with minimal visual impact.

The GC32 series' collared design incorporates two sliding stainless collars allowing stay bars to be attached to the centre mast, locked into place with large bolts. Designed for operation in the toughest conditions, this mast has a large stainless footplate designed to secure in place using 2 to 4 roof screws. The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs.

Installation of the tin roof design uses the existing roof screw holes. Screws are removed, the three foot plates and two stay bars positioned, and screws are weatherproofed and replaced.

This roof mast ships from our partner in the Sunshine Coast, Queensland.

Recommended Use

GC32 is our go-to mast for most ordinary rooftop transmitters. This roof mount is very strong but with a smaller diameter than larger microwave mounts it's less obtrusive.


Physical Specification

Grade C350 pipe, 33.7 mm diameter mast, stainless brackets
Hot dipped galvanised, Duragal to AS 4792
2045 x 1060 x 1060 mm (2 m pole)
6.5 kg
133.7 mm O/D galvanised centre pole
1Stainless centre pole foot plate, with M10 bolt + nylock
221.3 mm O/D galvanised stay bars
2Stay bar foot plate with M10 bolt + nylock
2Hot Dip Galvanised Elbow Joint Collars

The below table details how this item is attached.

QtyMechanismDimensions / Details
Screw / Bolt
Attaches to metal roof using standard roof screws

The below table details how equipment may be attached.

QtySurface TypeDimensions / Details
32 mm diameter, lengths up to 2.0 metres

Documentation & Resources

About the Supplier

APAC Infrastructure are an Australian steel fabrication and machining company dedicated to the high technology and renewable energy industries. APAC are focused on developing high tech height systems based on sustainable and advanced processes to ensure Australian business remains globally competitive.