The GC48 roof mast is a heavy duty mounting platform for a range of large antennas, microwave dishes, and mmWave systems.
The GC48 series' collared design incorporates two sliding collars allowing stay bars to be attached to the centre mast, locked into place with large M12 bolts. Designed for operation in even the most extreme environments, this mast has three large footplates designed to secure in place using 6 to 12 roof screws. The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs.
Installation of the tin roof design uses the existing roof screw holes. Screws are removed, the three foot plates and two stay bars positioned, and screws are weatherproofed and replaced.
This roof mast ships from our partner in the Sunshine Coast, Queensland. For sizes above 2.0 metres please contact us to arrange a freight estimate.
Recommended Use
GC48 is designed for critical systems. This is a large, solid roof mount that can support very large loads (66 m/s @ 0.07 m2 payload (Wind Region D)).
This mast is used for almost all our microwave and mmWave systems where near-zero deflection is required.
Physical Specification
| Material |
Grade C350 pipe, 48.3x2.9 mm mast, 33.7x2.5 mm stay bars
|
| Finish |
Hot dipped galvanised, Duragal to AS 4792
|
| Dimensions |
3045 x 1160 x 1160 mm (3.0 m mast)
|
| Weight |
17.3 kg
|
| Qty | Components |
|---|---|
| 1 | 48.3 mm O/D galvanised centre pole |
| 1 | Centre pole foot plate, with M10 bolt + nylock |
| 2 | 26.9 mm O/D galvanised stay bars |
| 2 | Stay bar foot plate with M10 bolt + nylock |
| 2 | 60.3 mm O/D galvanised collars with M12 locking bolt, M10 bolt + nylock |
Attachment Mechanisms
The below table details how this item is attached.
| Qty | Mechanism | Dimensions / Details |
|---|---|---|
|
4
|
Screw / Bolt
|
Attaches to metal roof using standard roof screws
|
Supported Interfaces
The below table details how equipment may be attached.
| Qty | Surface Type | Dimensions / Details |
|---|---|---|
|
1
|
Pole
|
48 mm diameter, lengths up to 3.0 metres
|
Images
Documentation & Resources
About the Supplier
APAC Infrastructure are an Australian steel fabrication and machining company dedicated to the high technology and renewable energy industries. APAC are focused on developing high tech height systems based on sustainable and advanced processes to ensure Australian business remains globally competitive.
