Teltonika RUTX11 Industrial 4G LTE-A Modem
Locally Stocked

This powerful 4G LTE router is designed as a primary or backup internet source where steady connectivity and high data throughput is required. RUTX11 is an LTE-Advanced modem providing Cat 6 data rates up to 300 Mb/s via 2C CA.

RUTX11 provides high speed local WiFi connectivity, operating as a Wave-2 802.11ac Dual Band WiFi access point with speeds up to 867 Mbps. The modem also supports Bluetooth LE for simplified industrial IO.

The modem has a built in GNSS / GPS module, allowing customised tracking to be installed on the modem, along with management through Teltonika's RMS dashboard system. Equipped with Dual-SIM and 4 x Gigabit Ethernet ports. RUTX11 has all advanced RutOS software and security features.

Recommended Use

This device is developed from a beefed up Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM SBC with an integrated Quectel EP06-E Cat 6 LTE-Advanced chipset, with a fully open source and customisable OpenWRT Linux OS. Using only a portion of its 256 MB flash memory allows additional daemons and custom services to be run to meet your specific application.

This is one of the few LTE-Advanced modems on the Australian market, which fully supports 2CA across all three Australian network operators.

signal_cellular_4_bar

4G Specification

LTE Chipset
Quectel EP06
LTE DL Category
Cat 6
LTE DL Data Rate
301.50 Mb/s
LTE DL Modulation
64QAM
Carrier Aggregation
2C CA
4G BandsSee Compatibility Checker
LTE UL Category
Cat 5
LTE UL Data Rate
75.40 Mb/s
LTE UL Modulation
64QAM
Max. MIMO
signal_wifi_4_bar

WiFi Specification

Chipset
MU-MIMO
4T4R
Roaming
Max. Throughput
867.00 Mb/s
Antennas
2
Max. Clients
100
Radios
2
Beamforming
Band Max. Radios Technology MIMO
1
802.11n
1
802.11ac Wave 2
1
BLE 4.0
developer_board

Chassis Specification

Operating Temperature-40 to 75 °C
Power Supply
9 – 50 Vdc (4 pin industrial socket), PoE
Ingress Protection
Dimensions
115 x 95 x 44 mm (H x W x D)
Weight
456 g
PoE Support
Passive PoE
Data Connections Data Rate Notes
4x RJ45 Copper
100BASE-T
1000BASE-T
RF Connections Notes
2x Female
Connects to external 3G / 4G antennas (2x2 MIMO)
2x Female
Connects to external WiFi antennas (2x2 MIMO)
1x Female
Connects to GNSS (GPS) Antenna
1x Female
Connects to Bluetooth Antenna

About the Supplier

In 21 years we have launched to mass production over 100 different devices in IoT, Networking, Connected vehicles, Asset and personal Tracking areas. That makes over 8.600.000 million devices sold worldwide in over 150 different countries. Although these numbers are impressive, Teltonika is more than that – we are about innovating, inspiring, connecting, educating and reliable partnership.