HBR N Male Connector for L-240 Cable, Solder Contact
$11.00
N1-C-L24
N1-C-L24
Locally Stocked

N connectors remain popular throughout a range of low frequency applications including UHF, 3G, 4G LTE, and WiFi technologies. Also referred to as the N-Type connector, the design is durable with good power handling characteristics.

This N Male crimp connector is used to terminate LMR-240 (or equivalent) series braided coaxial cables. The connector's coupling nut can be provided in either hex or finger-grip format.

Installation is very simple. After preparing the cable, the pin is soldered onto the centre conductor and outer body pushed over the top until the pin sits flush. A standard 6.5 mm (.255") hex die is used to crimp the ferrule to the coaxial cable.

Recommended Use

This N Male connector for L-240 series cables is manufactured by HB Radiofrequency as an economical, no-nonsense connector for L-240 / LMR-240 series coaxial cables.

Cable Suitability

L-240, sometimes referred to as LMR-240, is a low loss coaxial cable with a medium sized 6.10 mm outer diameter. This series is without a doubt the most popular choice of RF cable, due to its efficient compromise between performance and cost. 

L-240 cable provides the flexibility and easy installation of a smaller diameter cable, with the low attenuation and shielding advantages of a larger cable. Unlike larger cables, L-240 can pass 5G and mmWave frequencies up to 31 GHz.

Pound-for-pound L-240 has the lowest loss of any Flexible cable with performance comparable to Semi-Rigid hard-line cables.

settings_input_hdmi

Interface Specification

Series
Gender
Male
Body Shape
Straight
Mounting
Free Hanging
contactless

RF Performance

Operating Freq. Range 0 to 4 GHz
VSWR < 1.30:1
Working Voltage 500 Vrms
Input Impedance
50 Ω
Insertion Loss
0.05 dB
Insulation Resistance
> 5000 Ω
developer_board

Physical Specification

Body Material(s)
Body Plating
Nickel
Dimensions
30.5 x 20 mm (L x ø)
Weight
24.5 g
Contact Material(s)
Contact Plating
Gold
Operating Temperature -40 to 85 °C
Mating Cycles
> 500
CAD Drawing
N1-C-L24 CAD Drawing

About the Supplier

HB Radiofrequency engineer high performance 3G, 4G, and 5G components such as antennas, cable assemblies, and RF connectors. Equipment is sourced through the company's extensive global vendor network, providing best-in-class performance. HB Radiofrequency forms an essential unit within the Halberd Bastion enterprise, a wholly Australian-owned company with diversified business units across telecommunications procurement, manufacturing, and projects.