HBR RP-SMA Male Connector for L-240 Cable, Solder Contact
$9.00
RSA1-C-L24.S
RSA1-C-L24.S
Locally Stocked

RP-SMA connectors are designed to interface with reverse-polarised wireless transmitters such as WiFi access points. The RP-SMA Male connector has the conventional male hex nut, but using a female receptacle as the inner contact.

This Straight-bodied RP-SMA Male connector is designed for an ordinary crimp and solder attachment to LMR-240 and equivalent series braided coaxial cables.

Installation is very simple. After preparing the cable, the pin is soldered onto the centre conductor and outer body pushed over the top until the pin sits flush. A standard 6.48 mm (.255") hex die is used to crimp the ferrule.

Recommended Use

This RP-SMA Male coaxial connector has been designed to support an extended frequency range up to 6 GHz, ensuring compatibility with Sub-6 GHz wireless and 802.11ac/ax WiFi.

Cable Suitability

L-240, sometimes referred to as LMR-240, is a low loss coaxial cable with a medium sized 6.10 mm outer diameter. This series is without a doubt the most popular choice of RF cable, due to its efficient compromise between performance and cost. 

L-240 cable provides the flexibility and easy installation of a smaller diameter cable, with the low attenuation and shielding advantages of a larger cable. Unlike larger cables, L-240 can pass 5G and mmWave frequencies up to 31 GHz.

Pound-for-pound L-240 has the lowest loss of any Flexible cable with performance comparable to Semi-Rigid hard-line cables.

settings_input_hdmi

Interface Specification

Series
Gender
Male
Body Shape
Straight
Mounting
Free Hanging
contactless

RF Performance

Operating Freq. Range 0 to 6 GHz
VSWR < 1.50:1
Working Voltage 260 Vrms
Input Impedance
50 Ω
Insertion Loss
0.10 dB
Insulation Resistance
> 5000 Ω
developer_board

Physical Specification

Body Material(s)
Body Plating
Gold
Dimensions
18.50 x 8 mm (L x dia)
Weight
6.5 g
Contact Material(s)
Contact Plating
Gold
Operating Temperature -55 to 155 °C
Mating Cycles
> 500
CAD Drawing
RSA1-C-L24.S CAD Drawing

Documentation & Resources

About the Supplier

HB Radiofrequency engineer high performance 3G, 4G, and 5G components such as antennas, cable assemblies, and RF connectors. Equipment is sourced through the company's extensive global vendor network, providing best-in-class performance. HB Radiofrequency forms an essential unit within the Halberd Bastion enterprise, a wholly Australian-owned company with diversified business units across telecommunications procurement, manufacturing, and projects.