SKU
ACC-PT-00188
MPN
SA2-C-L24.BRM
Barcode
9337692003516

Description

SMA connectors are a mainstay of low frequency wireless technologies.

This bulkhead mounted SMA Female connector is designed for an ordinary crimp and solder attachment to LMR-240 and equivalent series coaxial cables.

Installation is simple. After preparing the cable, the pin is soldered onto the centre conductor and outer body pushed over the top until the pin sits flush. A standard 6.5 mm (0.255") hex die is used to crimp the ferrule.

The bulkhead interface allows the SMA connector to be panel mounted by drilling a 7 mm diameter hole and sliding the body from the rear through the hole. The supplied nut and washer secures the SMA connector to the mounting surface.

RF Connector Interface

RF Interface Body Shape Mounting

RF Specification

Start Frequency
0 GHz
Stop Frequency
6 GHz
RF Operating Voltage
≤ 480 Vrms
Input Impedance
50 Ω
Inner Contact Resistance
≤ 3 mΩ
Insulation Resistance
≥ 5000 mΩ
Outer Contact Resistance
≤ 2 mΩ

VSWR Measurement

Frequency VSWR
3000 MHz
≤ 1.2:1
6000 MHz
≤ 1.3:1

Physical Specification

Cable Group
Body Material
Body Plating
Insulator Material
Dimensions
22.5 × 9 × 9 mm
Weight
5.7 g
Conductor Attachment
Contact Material
Contact Plating
Min. Operating Temperature
-40 °C
Max. Operating Temperature
85 °C
Mating Cycles
> 500

Drawing

SA2-BRM-C-L24 CAD Drawing
Compliance/Certifications

Downloadable Resources

Powertec is a wireless technology manufacturer and systems integrator based in Australia. Operating since 1995, Powertec has grown to become the leading wireless technology distributor in its region, and a leading Infratech systems developer. Supporting over 1500 partners the company provides procurement, design, project management, and support services across Australia, New Zealand, Pacific ...