5250–5350 MHz (Indoor, 200 mW, DFS)

Country
Wireless Band

Operation of wireless network equipment on this Australian 5 GHz band is governed by Section 62 of the Radiocommunications (Low Interference Potential Devices) Class Licence 2015, which was last updated August 2019.

LIPD Class 2000 legislation permits the operation of RLAN transmitters between the range of 5250 to 5350 MHz, provided they operate under the conditions outlined below.

Conditions

  • The transmitter must have a maximum EIRP of 200 milliWatt.
  • The transmitter must only be used indoors.
  • The transmitter must use Dynamic Frequency Selection (DFS).
  • If the maximum EIRP is greater than 100 mW, the transmitter must use Transmit Power Control (TPC).
  • The power spectral density of a transmitter with a bandwidth greater than or equal to 1 MHz must not exceed 10 mW EIRP per MHz.
  • The power spectral density of a transmitter with a bandwidth less than 1 MHz must not exceed 40 µW EIRP per 4 kHz.